NCCER Pipeline Corrosion Control Level 1 Trainee Guide, Paperback
: In stock
This title is "Available on Demand" and will take up to 4-6 weeks delivery.
This exceptionally produced trainee guide features a highly illustrated design, technical hints and tips from industry experts, review questions and a whole lot more! Key content includes Introduction to the Pipeline Industry, Liquid Pipeline General Abnormal Operating Conditions (Pipeline Core), Locating Pipeline and Cable (CT 14.1 and 17.1), Measure Pit Depth and Wall Thickness (CT 8.1, 8.2, and 8.3), Inspect Buried and Submerged Pipe when Exposed (CT 5.1, 5.2, and 5.3), Aboveground Pipe Coating and Inspection (CT 7.1, 7.2, 7.3, 7.5, 13.1 and 13.2), Apply and Repair External Coatings on Buried and Submerged Pipe (CT 13.1 and 13.4), Cathodic Protection Measurement (CT 1.1, 1.5, 3.1, and 3.2), Test Station Repair (CT 2.1, 2.2, 2.3, and 2.4), Inspect Internal Pipe Surfaces (CT 12) (and Internal Corrosion Control (CT 10.1, 10.2, and 11).
Table of Contents
(Total Level Hours: 160; includes 72.5 of Core Curriculum)
66101-02 Introduction to the Pipeline Industry (Pipeline Core) (15 Hours)
Introduces the pipeline industry, including pipeline products and flow paths, maps and drawings used in the industry, and basic pipeline operations. Also covers hydraulics, pipeline equipment, electrical power systems, and corrosion control. Regulations, documentation, and pipeline industry occupations are also described.
66102-02 Liquid Pipeline General Abnormal Operating Conditions (Pipeline Core) (5 Hours)
Introduces the Abnormal Operating Conditions (AOCs) that can occur on a pipeline or in a pipeline facility. Includes general procedures on how to recognize and react to AOCs and the necessary documentation and notifications that must be completed when responding to AOCs.
61103-02 Locating Pipeline and Cable (CT 14.1 and 17.1) (5 Hours)
Identifies and explains One-Call notification systems and the methods used to locate pipe and cable. Also discusses the requirements for separations between underground structures, abnormal operating conditions (AOCs), and first responders.
61104-02 Measure Pit Depth and Wall Thickness (CT 8.1, 8.2, and 8.3) (5 Hours)
Explains how to use pit gauges to check pit depth, length, and profile. Describes how to take multiple readings for RSTRENG data and how to use ultrasonic meters to check pipewall thickness.
61105-02 Inspect Buried and Submerged Pipe when Exposed (CT 5.1, 5.2, and 5.3) (5 Hours)
Identifies and explains types of pipe coatings. Describes the different causes of coating damage. Covers inspecting pipe for corrosion and mechanical damage.
61106-02 Aboveground Pipe Coating and Inspection (CT 7.1, 7.2, 7.3, 7.5, 13.1 and 13.2) (15 Hours)
Describes aboveground pipe coating types and the causes of coating damage. Describes how to visually inspect aboveground pipe. Explains how to perform surface preparation and coating application for aboveground pipe.
61107-02 Apply and Repair External Coatings on Buried and Submerged Pipe (CT 13.1 and 13.4) (10 Hours)
Identifies and explains the desired qualities of buried pipe coatings. Explains surface preparation and coating application for buried/submerged pipe. Describes performing field coating repairs.
61108-02 Cathodic Protection Measurement (CT 1.1, 1.5, 3.1, and 3.2) (7.5 Hours)
Explains the basic theory of cathodic protection and the methods used to provide protection. Describes the instrumentation and meters used in cathodic protection. Identifies and explains half cell inspection and measuring structure to soil potential.
61109-02 Test Station Repair (CT 2.1, 2.2, 2.3, and 2.4) (5 Hours)
Identifies and explains the types and construction of test stations. Describes how to repair aboveground and belowground test stations. Explains the methods used to attach test station wires to pipe.
61110-02 Inspect Internal Pipe Surfaces (CT 12) (7.5 Hours)
Describes using ultrasonic gauges to check pipe wall thickness and pit gauges to check pit dimensions. Discusses how to establish pipe orientation and document the findings from wall thickness and pit dimension checks.
61111-02 Internal Corrosion Control (CT 10.1, 10.2, and 11) (7.5 Hours)
Explains how corrosion monitoring probes operate and the information that is collected. Describes using corrosion measurement tools and accurately recording the measurements obtainedquick-add/osha-10-hour-general-industry-osha10-gi /osha-10-hour-construction-osha10-1-0-ceu /osha-30-hour-construction-osha30-3-0-ceu /pipeline-technician-trading-card-100-count /nccer-pipeline-corrosion-control-level-2-trainee-guide-paperback /nccer-pipeline-corrosion-control-bundle /
Find a NCCER Class
Looking for the classroom experience? Brown offers a direct way to book any NCCER class around the country through us. We will locate the class closest to you. Click the link to get started.